Brass Strip
Pagpaila sa Produkto
Brass Sheet base sa electrolytic copper, zinc ug trace elements isip hilaw nga materyal niini, pinaagi sa pagproseso pinaagi sa ingot, hot rolling, cold rolling, heat treatment, surface cleaning, cutting, finishing, ug unya packing. Materyal nga proseso performance, plasticity, mekanikal nga mga kabtangan, corrosion resistensya, performance ug maayo nga lata. Kini kaylap nga gigamit sa electrical, automotive, komunikasyon, hardware, dekorasyon ug uban pang mga industriya
Panguna nga Teknikal nga Parameter
2-1Kemikal nga Komposisyon
| Alloy No. | Kemikal nga Komposisyon(%,max.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | kahugawan | |
| H96 | 95.0-97.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H90 | 88.0-91.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H85 | 84.0-86.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H70 | 68.5-71.5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H68 | 67.0-70.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H65 | 63.5-68.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Si Rem | 0.3 |
| H63 | 62.0-65.0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Si Rem | 0.5 |
| H62 | 60.5-63.5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Si Rem | 0.5 |
2-2 Alloy Table
| China | ISO | ASTM | JIS |
| H96 | CuZn5 | C21000 | C2100 |
| H90 | CuZn10 | C22000 | C2200 |
| H85 | CuZn15 | C23000 | C2300 |
| H70 | CuZn30 | C26000 | C2600 |
| H68 | ------ | ------- | ------ |
| H65 | CuZn35 | C27000 | C2700 |
| H63 | CuZn37 | C27200 | C2720 |
| H62 | CuZn40 | C28000 | C2800 |
2-3 Mga bahin
2-3-1 Yunit sa Pagtino: mm
| Ngalan | Alloy No.(China) | Kasuko | Gidak-on(mm) | ||
| Gibag-on | Lapad | Gitas-on | |||
| Brass Strip | H59 H62 H63 H65 H68 H70 | R | 4～8 | 600～1000 | ≤3000 |
| H62 H65 H68 H70 H90 H96
| Y Y2 M T | 0.2～0.49 | 600 | 1000～2000 | |
| 0.5～3.0 | 600～1000 | 1000～3000 | |||
Kasuko Mark: O. Mahumok;1/4H. 1/4 Gahi;1/2H. 1/2 Gahi;H. Gahi;EH. Ultrahard.
2-3-2 Yunit sa Pagtugot: mm
| Gibag-on | Lapad | |||||
| Gibag-on Itugot Pagtipas ± | Kalapad Itugot ang pagtipas ± | |||||
| ＜400 | ＜600 | ＜1000 | ＜400 | ＜600 | ＜1000 | |
| 0.5~0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
| 0.8~1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
| 1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
2-3-3 Mekanikal nga Pagganap
| Kasuko | Kusog sa Tensile N/mm2 | Elongation ≥% | Katig-a HV | |
| M | (O) | ≥290 | 35 | ------ |
| Y4 | (1/4H) | 325-410 | 30 | 75-125 |
| Y2 | (1/2H) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (EH) | ≥490 | 2.5 | ≥145 |
| R |
---
| --- | --- | |
Kasuko Mark: O. Mahumok;1/4H. 1/4 Gahi;1/2H. 1/2 Gahi;H. Gahi;EH. Ultrahard.
Teknik sa Paggama
