Copper-nickel Strip
Pagpaila sa Produkto
Ang copper-nickel alloy ginama sa tumbaga, puthaw, nickel, zinc ug mga elemento sa pagsubay, pinaagi sa pagproseso sa mga ingot, init nga giligid, bugnaw nga giligid, pagtambal sa kainit, paglimpyo sa nawong, pagputol, pagtapos, pagputos ug uban pang mga proseso.ang produkto adunay nindot nga gloss, maayo kaayo nga init ug bugnaw nga pagtrabaho, ductility, corrosion resistance, fatigue resistance, taas nga pagka-flexible, maayo nga electrical ug mekanikal nga mga kabtangan ug shielding performance.Kini kaylap nga gigamit sa paghimo sa basa ug corrosive media sa buhat sa structural components, flexible components, tukma instrumento, komunikasyon industriya, liquid kristal oscillation elemento housings, medikal nga ekipo, konstruksyon, hangin instrumento ug mga galamiton, ug adlaw-adlaw nga mga kinahanglanon ug uban pa .
Panguna nga Teknikal nga Parameter
4-1 Mekanikal nga Komposisyon
Materyal nga | Alloy No. | Kemikal nga Komposisyon(%,max.) | ||||||||
Ni+Co | Fe | Zn | Mn | Pb | Si | Al | Cu | kahugawan | ||
Copper-nickel Alloy | B19 | 18.0-20.0 | 0.5 | 0.3 | 0.5 | 0.005 | 0.15 | ------ | Si Rem | 0.2 |
Zinc-copper-nickel Alloy | BZn18-18 | 16.5-19.5 | 0.25 | Si Rem | 0.5 | 0.05 | ------ | ------- | 63.5-66.5 | ------- |
BZn18-26 | 16.5-19.5 | 0.25 | Si Rem | 0.5 | 0.05 | ------ | ------- | 53.5-56.5 | ------ | |
BZn15-20 | 13.5-16.5 | 0.5 | Si Rem | 0.3 | 0.02 | 0.15 | ------- | 62.0-65.0 | 0.9 |
4-2 Alloy Table
Materyal nga | China | ISO | ASTM | JIS |
Copper-nickel Alloy | B19 | ----- | C71000 | MH19 |
Zinc-copper-nickel Alloy | BZn18-18 | CuNi18Zn18 | C75200 | C7521 |
BZn18-26 | CuNi18Zn16 | C77000 | C7701 | |
BZn15-20 | CuNi15Zn20 | C75400 | C7541 |
Mga bahin
4-3-1Specification Unit: mm
Materyal nga | Alloy No. | Kasuko | Gidak-on(mm) | |
Gibag-on | Lapad | |||
Zinc-copper-nickel Alloy | B19 BZn18-18 BZn18-26 BZn15-20 | O 1/2H H | 0.15-1.2 | 10-300 |
Kasuko Mark: O.Mahumok;1/4H.1/4 Gahi;1/2H.1/2 Gahi;H.Gahi;EH.Ultrahard.
4-3-2Yunit sa Pagtugot: mm
Gibag-on | Lapad | |||
Gibag-on Itugot Pagtipas± | Kalapad Itugot ang pagtipas ± | |||
<300 | <600 | <400 | <600 | |
0.1~0.3 | 0.008 | 0.015 | 0.3 | 0.4 |
0.3~0.5 | 0.015 | 0.020 | 0.3 | 0.5 |
0.5~0.8 | 0.020 | 0.030 | 0.3 | 0.5 |
0.8~1.2 | 0.030 | 0.040 | 0.4 | 0.6 |
4-3-3 Mekanikal nga Pagganap
Kasuko | Kusog nga Tensile N/mm2 | Elongation ≥% | Katig-a HV | |
M | (O) | ≥375 | 20 | ------ |
Y2 | (1/2H) | 440-650 | 5 | 120-210 |
Y | (H) | 540-730 | 3 | 150-240 |
T | (EH) | ≥710 | ------ | 210-270 |
Kasuko Mark: O.Mahumok;1/4H.1/4 Gahi;1/2H.1/2 Gahi;H.Gahi;EH.Ultrahard.
Mga Feature sa Pagganap
●Note: Mahimong negotiable.